The following BPW wheels were designed by myself and produced by CNC machining. They are a fantastic quality wheel and all are identical. They are designed to take the BP and DU rubber tyres, and the wheel inserts shown on the wheel inserts page. They produce a remarkably real wheel, suitable for static display as well. The numbering system describes the wheel diamter, wheel width, internal diameter and whether it is screw threaded or grub screwed:
The first figure describes the outside diameter - 13mm, 16mm, 18mm or 21mm;
The second figure describes the width - 06, 07, 10, 13 or 16mm;
The middle figures describe the internal diameter of each wheel - 09, 13, 15 or 17mm. This indicates the size wheel insert that will fit;
The last letter indicates how the wheel is attached - T for screw threaded, G for grub screwed.
|
|
|
|
|
13mm dia x 6mm, 1/8" threaded wheels. Designed to take DU32001 & BPT 2006 rubber and WI dia 9 and 10mm inserts, and all WIC-9 inserts. |
|
|
|
13mm dia x 13mm, 1/8" threaded wheels. Designed to take DU32003 & BPT 2013 rubber and WI dia 9 and 10mm inserts, and all WIC-9 inserts. |
|
|
|
16mm dia x 13mm, 1/8" threaded wheels. Designed to take BP2713, DU24006, DU 32006, BPT 2013LP & BPT 2513 rubber and WI dia 13mm inserts, and all WIC-13 inserts. |
|
|
|
18mm dia x 13mm, 1/8" threaded wheels. Designed to take BP2713, DU24006 & BPT 2513 rubber and WI dia 15mm inserts, and all WIC-15 inserts. |
|
|
|
21mm dia x 13mm, 1/8" threaded wheels. Designed to take DU24007 & BPT 2513LP rubber and all WIC-17 inserts. Gives a modern low profile wheel and tyre combo. Looks great on those modern sports and touring cars. |
|
|
|
21mm dia x 16mm, 1/8" threaded wheels. Designed to take DU24008 & BPT 2516LP rubber and all WIC-17 inserts. Gives a modern low profile wheel and tyre combo. Looks great on those modern sports and touring cars. |
|
|
|
13mm dia x 6mm, 3/32" grub screwed wheels. Designed to take DU32001 & BPT 2006 rubber and WI dia 9 and 10mm inserts, and all WIC-9 inserts. These make great replacement wheels for those poor plastic wheels on Scalex, Ninco, Fly etc. Combine them with DU rubber and your grip increases too! |
|
|
|
Exactly the same size wheel as above, but with a 1/8" hole. |
|
|
|
13mm dia x 10mm, 3/32" grub screwed wheels. Designed to take DU32002 & BPT 2010 rubber and WI dia 9 and 10mm inserts, and all WIC-9 inserts. These make great replacement wheels for those poor plastic wheels on Scalex, Ninco, Fly etc. Combine them with DU rubber and your grip increases too! |
|
|
|
13mm dia x 13mm, 3/32" grub screwed wheels. Designed to take DU32003 & BPT 2013 rubber and WI dia 9 and 10mm inserts, and all WIC-9 inserts. These make great replacement wheels for those poor plastic wheels on Scalex, Ninco, Fly etc. Combine them with DU rubber and your grip increases too! |
|
|
|
Exactly the same size wheel as above, but with a 1/8" hole. |
|
|
|
16mm dia x 13mm, 3/32" grub screwed wheels. Designed to take BP2713, DU24006, DU 32006, BPT 2013LP & BPT 2513 rubber and WI dia 13mm inserts, and all WIC-13 inserts. |
|
|
|
18mm dia x 7mm, 1/8" grub screwed wheels. Designed to take DU24003 & BPT 2507 rubber and WI dia 15mm inserts, and all WIC-15 inserts. |
|
|
|
21mm dia x 13mm, 3/32" grub screwed wheels. Designed to take DU24007 & BPT 2513LP rubber and all WIC-17 inserts. Gives a modern low profile wheel and tyre combo. Looks great on those modern sports and touring cars. |
|
|
|
21mm dia x 16mm, 1/8" grub screwed wheels. Designed to take DU24008 & BPT 2516LP rubber and all WIC-17 inserts. Gives a modern low profile wheel and tyre combo. Looks great on those modern sports and touring cars. |
|
|
|
Same wheels as above but with a 3/32" hole. Ideal for the TSRF chassis |
|
|
|
15.5mm dia x 10mm, 3/32" grub screwed wheels with a boss to take SIPT01-03rubber, and Scalex, Ninco, Fly etc tyres. These are designed to replace those plastic wheels that never are round and always fall off. 13mm inside dia to take all WI 13mm dia inserts and all WIC-13 inserts. These are what you have been wishing for for years. Direct replacement on Scalex, Fly, SCX. Ninco reqire slight drilling to fit their larger axle. |
|
|
|
|
|
|
|
14 dia x 8, 1/8" threaded Wheels. Rvell 1/32 rear wheels. |
|
|
|
8 dia x 9, 1/8" threaded Mini Wheels |
|
|
|
12 dia x 12, 1/8" threaded Wheels |
|
|
|
11 dia x 12, 1/8" threaded Wheels |
|
|
|
Sakatsu Wheels, 11mm wide, 16.6 mm dia, 3mm axle, grub screw fixing, pr |
|
|
|
Sakatsu Wheels, 13mm wide, 14.6 mm dia, 3mm axle, grub screw fixing, pr |
|
|